정보/유익정보에 해당하는 글 9

갤럭시 워치 삼성페이 설치 방법, 삼성페이 사용법

정보/유익정보|2019. 5. 11. 06:17

갤럭시 워치 삼성페이 설치하는 방법 , 삼성페이 사용법




저 같은 경우에는 미국온라인 쇼핑을 통해 갤럭시 워치를 구매를 했습니다. 이 방법을 사용하기전에 한국에서 판매되는 갤럭시 워치는 NFC기능이 지원이 되는지 확인을 해주세요! 저의 남편이 알려준 갤럭시 워치에 삼성페이 설치하는 방법입니다. 영어 해석이 부족한 점....참고해주세요!



삼성페이를 설치하기 이전에 위에 파일을 다운받아주세요!!


1. Disconnect the Bluetooth on your watch and connect it to your Wi-Fi so that you can access it later from your computer.


1. 워치 블루투스를 끈 뒤 워치 Wi-Fi를 키고 컴퓨터와  같은 Wi-Fi 를 연결해줍니다. 

 

2. Setup your watch for debugging (https://www.youtube.com/watch?v=T_m3wsF7Ozs)


2. 워치 디버깅을 켜주세요!


3. Watch status should now not be connected to your phone, powered on, Bluetooth off, and connected to Wifi.


3. 핸드폰과 워치를 연결하지 마세요! (확인할것: 워치가 키기, 블루투스 끄기, 와이파이 연결하기(컴퓨터와 같은 네트워크))


4. Download files from this blog and unzip them onto your computer.


4. 이 글의 업로드된 파일을 컴퓨터에 다운받아 집 압축을 풀어주세요!


5. Use the correct zip version of “sdb_2.2.60_windows” for your computer (64 bit or 32 bit)

5. 알집 버전은 “sdb_2.2.60_windows” (64비트 또는 32 비트)




6. Navigate to the extracted folder and find the “sdb.exe” file (Example path from extracted folder: sdb_2.2.60_windows-64 >>> data >>> tools >>> sdb.exe)


추출한 폴더로 이동하여 “sdb.exe” 을 찾습니다. 예를 들어 folder: sdb_2.2.60_windows-64 >>> data >>> tools >>> sdb.exe)


7. Right Click on “ansicron.exe” and run in administrator mode


ansicron.exe파일을 오른쪽 마우스를 클릭한 뒤에 관리자권한으로 실행 하기를 누르세요!



8. In the command prompt window, type sdb connect (WATCH IP ADDRESS) and press enter. In my case I typed exactly “sdb connect 192.168.1.109”.


8.프롬프트 창에 "WATCH IP ADDRESS" 를 입력한 뒤 엔터를 누르세요( 저같은 경우에는 sdb connect 192.168.1.109 라 입력했어요)


9. You might see a device unauthorized in the command prompt after hitting Enter. Check your watch and accept the RSA Fingerprint print prompt and select the checkmark.


9.엔터를 누르면 명령 프롬프트에 장치가 인증 되지 않은 것을 볼수 있을것입니다. 시계를 확인하고 RSA에 대한 동의를 한 뒤 확인을 선택해주세요,



10. In command prompt, type “sdb shell” which should bring up “sh-3.2$” if it’s working correctly.


명령 프롬프트에서  “sdb shell”를 입력하고 엔터를 눌러줍니다. 그럼 제대로 작동 했다면  “sh-3.2$” 이라 나타납니다. 


11. Finally type: “launch_app csc-manager.csc-pre-configuration” and “Enter”

마지막으로  “launch_app csc-manager.csc-pre-configuration”  입력 후 엔터를 눌러주세요!



12. If done correctly, this will bring up the CSC code on your watch. Choose "XAR' from the list of choices if available  


만약 제대로 완료가 되었다면 워치에 CSC 코드가 표시됩니다. 리스트에서 "XAR"가 있다면 선택해주세요.  


"XAR"을 사용할 수없는 경우 "XA"로 시작하는 모든 코드를 찾으세요. 삼성페이와 한글을 사용할 수있을 것입니다.


※주의사항:여기서 주의해야할점은 만약 XAR까지 설정 했다면 이전에 했던 다른 셋팅들초기화됩니다. 이미 많은 것은 설정 해 놨거나 초기화가 어려울 경우에는 이 설치방법을 사용하지마세요!









반응형

댓글()